BRTNN15WSS4P 四轴伺服机械手
$40,000.00
【产品详情】
BRTNN15WSS4P，系列适用于 470T-800T 的各型塑胶射出成型机、手臂形式双截式，单臂，四轴 AC 伺服驱动，标配 C 伺服驱动轴，C 轴旋转角 90°。取物时间快，比同类机型更加节省时间，定位精准，速度快，寿命长，故障低，安装机械手可增加产能（10-30%），降低产品的不良率，保障操作人员的安全性，减少人工，精准控制生产量，
减少浪费，保证交期。
四轴驱控一体控制系统：信号线少，远距离通讯，扩展性能好，抗干扰
能力强，重复定位精度高，可以同时控制多轴，设备维护简单，故障率少。
【主要规格】
适用场景：注塑取件、镶件埋入
适配注塑机：470T-800T
垂直行程：1500 mm
横行行程：900 mm
横移行程：2260 mm
循环时间：9.03 s
电源容量：4.03 kVA
末端执行器：两吸两抱
本体重量：500 kg
【规格参数表】
| 电源容量(kVA) | 适用成型机(ton) | 驱动方式 | 治具型式
| 3.18 | 470T-800T | AC 伺服马达 | 两吸两抱
| 横行行程(mm) | 引拔行程(mm) | 上下行程(mm) | 最大荷载(kg)
| 2260 | 900 | 1500 | 15
| 取出时间(sec) | 全循环时间(sec) | 空气消耗量(NI/cycle) | 重量(kg)
| 2.74 | 9.03 | 3.2 | 500
| 定位精度(mm) | | |
| ±0.1 | | |
BRTNN15WSS4P series applies to all types of horizontal injection machine ranges of 470T-800T for take-out products. The vertical arm is the telescopic type with the product arm. Four-axis AC servo drive, with a C-servo axis on the wrist, the rotation angle of the C-axis:90 ° . Save time than similar models, accurate positioning, and short forming cycle. After installing the manipulator, the productivity will be increased by 10-30% and will reduce the defective rate of products, ensure the safety of operators, reduce manpower and accurately control the output to reduce waste.
Four-axis driver and controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, can simultaneously control multiple axes, simple equipment maintenance, and low failure rate.
| 产品系列 | BRTN Series |
|---|---|
| 横移行程(mm) | 1500 |
| 最大负载(kg) | 15 |
| 适配注塑机 | 470T-800T |
| 轴数 | 4 |
| 英文名称 | Four-axis servo Manipulator |
Reviews
There are no reviews yet.