BRTM09IDS5PC 五轴伺服机械手
$30,000.00
【产品详情】
BRTM09IDS5PC/FC 系列适用于 160T-320T 的各种卧式射出成型机的成品取出、手臂形式单截式，双臂 , 五轴 AC 伺服驱动，可以应用于快速取出或模内贴，模内镶件等特殊产品应用，定位精准，速度快，寿命长，故障低，安装机械手可增加产能 ( 10-30% ) 降低产品的不良率，保障操作人员的安全性，减少人工，精准控制生产量，减少浪费，保证交期。
五轴驱控一体控制系统：信号线少，远距离通讯，扩展性能好，抗干扰能力强，重复定位精度高，可以同时控制多轴，设备维护简单，故障率少。
【主要规格】
适用场景：注塑取件、镶件埋入
适配注塑机：160T-320T
垂直行程：900 mm
横行行程：P:650-R:650 mm
横移行程：1500 mm
循环时间：7.60 s
电源容量：3.1 kVA
末端执行器：两吸四抱
本体重量：310 kg
【规格参数表】
| 电源容量(kVA) | 适用成型机(ton) | 驱动方式 | 治具型式
| 3.1 | 160T-320T | AC伺服马达 | 两吸四抱
| 横行行程(mm) | 引拔行程(mm) | 上下行程(mm) | 最大荷载(kg)
| 1500 | P:650-R:650 | 900 | 10
| 取出时间(sec) | 全循环时间(sec) | 空气消耗量(NI/cycle) | 重量(kg)
| 2.74 | 7.60 | 4 | 310
| 定位精度(mm) | | |
| ±0.05 | | |
BRTM09IDS5PC series is suitable for the finished product extraction of 160T-320T horizontal injection molding machine, single-cut arm type, two arms, five-axis AC servo drive, can be used for quick removal or in-mold sticking, in-mold inserts and other special product applications. Accurate positioning, high speed, long life, low failure rate. Installing the manipulator can increase production capacity by 10-30% and will reduce the defective rate of products, ensure operator safety, and reduce manual labor. Accurately control production, reduce waste and ensure delivery.
Five-axis driver and controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, multi-axis can be controlled at the same time, simple equipment maintenance, and low failure rate.
| 产品系列 | BRTM Series |
|---|---|
| 横移行程(mm) | 900 |
| 最大负载(kg) | 10 |
| 适配注塑机 | 160T-320T |
| 轴数 | 5 |
| 英文名称 | Five-axis servo Manipulator |
Related products
BRTN17WSS3PC 三轴伺服机械手
BRTN30WSS5PC 五轴伺服机械手
BRTNN15WSS3P 三轴伺服机械手
BRTR07WDS5PC 五轴伺服机械手
BRTR08TDS5PC 五轴伺服机械手
BRTV09WDS5P0 五轴伺服机械手
BRTV13WDS5P0 五轴伺服机械手
Reviews
There are no reviews yet.